Wikia

WoWWiki

Item equipping

Talk24
102,236pages on
this wiki

Without macros Edit

Note that the need for macro juggling to switch equipment is all but gone with the advent of AddOns such as ItemRack or Outfitter. These addons can themselves be controlled with macros if you like :-)

Basics Edit

/script PickupContainerItem(bag, slot)

Bags count from 0 to 4 from the right, 0 being your backpack and 4 being your leftmost pack. Slots are numbered starting at the topmost, leftmost slot and counting left to right, top to bottom. For example, a 10-slot pack is numbered like this:

X X 1 2
3 4 5 6
7 8 9 10

To access the first slot on the leftmost bag, the script would be /script PickUpContainerItem (4, 1);

The basic command works like this:

  • If no item in cursor:
    • If item in bag:slot - picks up the item and puts it on the cursor.
    • If no item in bag:slot - does nothing
  • If item on cursor
    • If item in bag:slot - switches the item in the bag:slot with the one on the cursor.
    • If no item in bag:slot - puts down item from cursor into bag:slot

/script PickupInventoryItem(inventorySlot)

Picks up/puts down/switches item into the specified slot.

See InventorySlots for ids and mappings.


Better method:

/script UseContainerItem(bag, slot);

Will automatically equip the item referenced by bag,slot, placing any existing already equipped item in the bag slot.


Yes, this is undoubtedly easier... until you start dealing with dualwielding. At which point UseContainerItem stops being nice. -- Sarf


Please be very careful when using the UseContainerItem(bag,slot) command. If you are talking to a vendor and use this macro (assuming no safety measures in the script) then all your macro items will be sold. I just managed to sell 7 items to a vendor. Fortunately, I was able to retrieve the last item and Blizzard restored the other equipment items for me.


For those of us that are prone to doing this you can do a check to see if you are interacting with an NPC. example weaponswap(2H <-> 1H/OH):

/script TargetUnit("npc"); 
if ( UnitName("target") == nil or not UnitIsUnit("target","npc") ) 
then 
  if ( not CursorHasItem() ) then
    PickupInventoryItem(offHandInventory);
    PickupContainerItem(offHandBag,offHandSlot);
    UseContainerItem(mainHandBag,mainHandSlot);
    UseContainerItem(offHandBag,offHandSlot);
  end
end

-- Trinkit


The best method for ensuring that you do not accidentally sell anything to a vendor is:

/script CloseMerchant();

The aforementioned if-then script can still fail if you are in a vendor window and target another entity, whereas the CloseMerchant script will always close any merchant window. It's also much shorter, so you can fit more lines of item swapping into the character-limited macro box. --TheRayven

Multiple commands Edit

There is a problem when executing multiple Pickup commands because they execute instantaneously on your client, which is not always synched with the server.

Therefore, follow these simple guidelines:

  1. Check if the cursor has an item on it and execute all your pickup commands on the same line.
    Example:
    if ( not CursorHasItem() ) then PickupContainerItem(...); ... end
  2. Pickup items once, and drop them once for one macro.

Good luck!


Weapon swapping scripts Edit

NOTE: When copying the scripts, make sure they end up on ONE line. Also, you will NEED to change the offhandBag, offhandBagSlot and mainhandBag, mainhandBagSlot names to actual numbers, as the scripts will NOT fit in a macro as it is.

From mainhand/offhand to mainhand/offhand Edit

Script to swap items in both hands to other items in both hands. offhandBag, offhandBagSlot and mainhandBag, mainhandBagSlot need to be specified (duh).

/script if ( not CursorHasItem() ) then PickupContainerItem(mainhandBag, mainhandBagSlot); PickupInventoryItem(16); PickupContainerItem(mainhandBag, mainhandBagSlot); PickupContainerItem(offhandBag, offhandBagSlot); PickupInventoryItem(17); PickupContainerItem(offhandBag, offhandBagSlot); end

From mainhand to mainhand/offhand Edit

Script to switch from item in main hand to other items in both hands. offhandBag, offhandBagSlot and mainhandBag, mainhandBagSlot need to be specified (duh). Weapon in main hand will end up in mainhandBag, mainhandBagSlot.

/script if ( not CursorHasItem() ) then PickupContainerItem(4, 2); PickupInventoryItem(16); PickupContainerItem(4, 1); PickupContainerItem(4, 2); PickupInventoryItem(17); if ( CursorHasItem() ) then PickupContainerItem(4, 2); end

Switch from a 2h to 1h+shield

/script if ( not CursorHasItem() ) then PickupInventoryItem(17); if ( CursorHasItem() ) then PickupContainerItem(offhandBag, offhandBagSlot); end PickupContainerItem(mainhandBag, mainhandBagSlot); PickupInventoryItem(16); PickupContainerItem(mainhandBag, mainhandBagSlot); end

Any to Any Edit

Script to swap from one set of weapons to another, in any combination. I've included an expanded version of the somewhat obfuscated code, although it's a too long to be usable itself. The CloseMerchant() call is included for safety reasons.

The shorter version uses bag 3, slot 5 for the main weapon and bag 4, slot 6 for the offhand item, whereas the expanded version uses more descriptive terms for those locations.

Note that the held weapons will end up in those inventory slots after the swap, so if you're swapping between a two-handed weapon and a one-handed + offhand configuration, you'll need to leave the offhand bag slot empty while you're wielding it, or swapping it out won't work properly.

/script local a,b,c=CursorHasItem,PickupInventoryItem,PickupContainerItem;if(not a())then CloseMerchant();b(17);if(a())then c(4,6);c(4,5);b(16)else c(4,5);b(16);c(4,6);b(17)end end

/script
 if ( not CursorHasItem() )then
  CloseMerchant();
  PickupInventoryItem(17);
  if ( CursorHasItem() ) then
   PickupContainerItem(offhandBag, offhandBagSlot);
   PickupContainerItem(mainhandBag, mainhandBagSlot);
   PickupInventoryItem(16);
  else
   PickupContainerItem(mainhandBag, mainhandBagSlot);
   PickupInventoryItem(16);
   PickupContainerItem(offhandBag, offhandBagSlot);
   PickupInventoryItem(17);
  end
 end

From mainhand to mainhand Edit

Script to switch from item in main hand to another item in the main hand. mainhandBag, mainhandBagSlot need to be specified (duh). The equipped weapon will end up on mainhandBag, mainhandBagSlot.

/script if ( not CursorHasItem() ) then PickupContainerItem(mainhandBag, mainhandBagSlot); PickupInventoryItem(16); PickupContainerItem(mainhandBag, mainhandBagSlot); end

Swap Mainhand and Offhand Weapons Edit

This script is pretty simple. On my rogue I wanted to switch my offhand to my mainhand, and vice-versa (use dagger for ambush, then swap so I can SS with the sword). You can accomplish this with a very simple macro that will swap back and forth each time you use it. -- Loganis

/script if ( not CursorHasItem() ) then PickupInventoryItem(17); PickupInventoryItem(16); end

Simple Macro with item slots Edit

/equipslot <inventory number> <bag number> <bag slot number>

Basically this equips the item specified in your bag to the inventory slot indicated by the first number in your macro. An example would be:

/equipslot 16 4 1

This equips a weapon to your main hand found in your last bag in the first slot. Essentially this accomplishes the same as the scripts from above but with much less characters, leaving your macros free to do other things.

With Cosmos Edit

If you are using Cosmos, you can use the following commands :

/saveset <Number>
/loadset <Number>

Simple Swap Without ItemslotsEdit

Halow's Item Switch (1h+Shield to 2h)

I don't know about you guys but I cant stand item slot specific macros, to complicated for me and a waste of macro space. So I made this little gem...

/equip [nomodifier] <1H Item Name>
/equip [nomodifier] <OH Item Name>
/equip [modifier:shift] <2H Item Name>

Note** make sure you don't put the <> around your weapons.

This macro will equip your 1handed weapon and your shield/offhand weapon when you click it, and when you click it while holding down shift it will equip your 2handed weapon. This should also work for dual wield to 2hander though I haven't tested it.

Weapon Swap Using Equipment ManagerEdit

NOTE: You'll have to activate your the Equipment Manager first (Options > Interface > Features > [X] Use Equipment Manger), it will appear at the top right corner of your character frame.

The next step is to create a set for each weapon you want to use in your macros. It's important to deactivate all the other item slots, you simply click the yellow arrow at each slot and choose "Ignore this slot", this will prevent Error messages in combat. After you've created the weapon sets, you can include them in your macros using this command:

/equipset SetName

Replace SetName with the exact name of your own weapon set. The advantage of this method is, in comparison to the /equip and /equipslot commands, that it works better when lags appear. Of course it's possible to include multiple sets in one macro using modifiers as shown above.

Around Wikia's network

Random Wiki